TECHNET Archives

November 2004

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Jack C. Olson" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Jack C. Olson
Date:
Tue, 23 Nov 2004 00:18:09 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (45 lines)
That's the question.

No, it doesn't need to be depanelized.
One board would be 13x27.

I was just thinking if the paste screen is large
enough and the conveyor is at least 13" wide,
what difference does the length make?
(I'm not an assembly guy. You can tell, right?)

Doesn't it just go through the oven zone by zone
by zone until it gets to the end? Why can't I
have a 48" board?  All I could think of was that
the pick and place program would have to be
divided into sections with extra fiducials, so you
could place one zone, move the conveyor, place
another zone? ridiculous?

Jack (the "thinkin' outside the box" guy)



----- Message from "Morse, Carrie" <[log in to unmask]> on Fri, 19 Nov
2004 14:16:09 -0500 -----

                    Subject: Re: LongBoards


What are the max dimensions the assembly placement machines can handle?

Will the board need to be depanelized?  If so, what's the max size for
that equipment?

-Carrie

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2