Subject: | |
From: | |
Reply To: | |
Date: | Wed, 17 Nov 2004 08:43:13 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Brian:
Wires can be soldered on to the traces and then the joints be coated. The wires are hooked to the proper voltage sources and the Surface Insulation Resistance test is done. This test under these conditions is being done by a local lab that is sanctioned by IPC. Is dendrite growth or molecular migration impeded within the inner layers and facilitated by air, temp and humidity on the outer layers?
Thanks for your input and clarifications
Ramon
-----Original Message-----
From: Brian Ellis [mailto:[log in to unmask]]
Sent: Wednesday, November 17, 2004 1:50 AM
To: Dehoyos, Ramon
Subject: Re: [TN] Solder Mask expectations / pushing the envelope?
First of all, your question should not be "...testing the voltage should
not exceed 100V/mm" but "...testing the voltage GRADIENT should not
exceed 100V/mm". This is not semantics but accuracy. I emphasize the
point deliberately to try and instill this important notion into popular
thinking.
Secondly, how can you measure SIR (SURFACE IR) on a coated board, when
the conductors are no longer on the surface?
Thirdly, if you measure the IR of a coated board, the ionic migration
within the polymers is not going to change just because it's coated, is
it? What are you trying to measure, IR or breakdown voltage? They are
not the same thing.
Brian
Dehoyos, Ramon wrote:
>
> Hi Brian:
> To obtain good results during SIR testing the voltage should not exceed 100V/mm. Is that a true statement? This is for uncoated boards. For coated boards it should be higher, Shouldn't it?
> Regards,
> Ramon
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|