Sender: |
|
X-To: |
|
Date: |
Tue, 30 Nov 2004 09:49:52 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="us-ascii" |
From: |
|
Parts/Attachments: |
|
|
Have some quick screen experience. They hold up rather well and may
actually have some applicability on the lower end (peak < 255 degC)of
the Pb-free process spectrum. Issue is that they seem to be rather
challenged if you try to use a boards coated for a Pb-free process in a
Sn/Pb process. Can't seem to burn off the coating. Just too robust.
BTW - Rumor has it that these newer OSP coatings for Pb-free seem to
based on Aryl-Phenyl Imidazole compounds.
Rich K / KEDS
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Cheryl Tulkoff
Sent: Tuesday, November 30, 2004 8:59 AM
To: [log in to unmask]
Subject: [TN] Entek Plus Cu106A HT
Has anyone replaced their old OSP with the Entek Plus Cu106A HT (high
temperature)on standard tin/lead processes? We don't have lead-free
processes yet but our board vendors would like us to use this material
now as they convert. It is supposed to provide significantly improved
performance for lead-free. It is not supposed to impact solderability
for eutectic tin/lead soldering processes. We will be evaluating some
samples but are looking for someone who might have tried this in their
processes.
Thanks, Cheryl
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|