TECHNET Archives

October 2004

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Tempea, Ioan" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Tempea, Ioan
Date:
Fri, 1 Oct 2004 09:22:22 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (77 lines)
Thank you Werner,

I'm saving it in the right place now.

But does the filling percentage play a role? Should I push my PCB suppliers
to measure and guarantee something close to 100% filling?

One supplier told me they are printing the solder mask in the vias and check
with blotting paper if the stuff gets through. And if not, they make a
second pass. For me this is an overkill and we must be paying something
extra for it.

By the way, our products are telecom, some for outdoors and high-rel, like
911 systems and power line protection.

Best regards,
Ioan

> -----Original Message-----
> From: Werner Engelmaier [SMTP:[log in to unmask]]
> Sent: Friday, October 01, 2004 9:02 AM
> To:   [log in to unmask]
> Subject:      Re: [TN] Via filling
>
> Hi Ioan,
> PTVs filled with solder mask/epoxy during the soldering processes will
> experience less compressive loads on the copper barrel, and thus less
> tensile
> stresses which are part of the loading leading to innerlayer separation.
> During
> operationall use, this fill plys no significant reliability role.
> PTVs filled with solder of course offer no advantage during the soldering
> processes--they are filled during them. In operational use, fully filled
> PTVs are
> subjected to reduced loads on the copper barrel than empty ones, and PTVs
> with voids in the solder fill will experience localized higher loads due
> to the
> stress concentrations---having said this, it needs to be emphasized that
> this
> is only significant if the operational conditions are severe, such
> military and
> automotive.
>
> Regards,
> Werner Engelmaier
> Engelmaier Associates, L.C.
> Electronic Packaging, Interconnection and Reliability Consulting
> 7 Jasmine Run
> Ormond Beach, FL 32174 USA
> Phone: 386-437-8747, Fax: 386-437-8737, Cell: 386-316-5904
> E-mail: [log in to unmask], Website: www.engelmaier.com
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> -----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2