Happy Monday All!

I have an engineer from our Joplin plant that's looking for some Phenolic
material to machine a small circular cap out of. What he needs is a small
billet
the of material, he's already got a local machine shop to do the machining
for him.

Here's the note as it reads from the drawing:

"The material shall be a natural colored laminate composed of Type VIII,
VIIIA or VIII B glass cloth in accordance with Mil-C-9084, Class 4, impregnated
with phenolic resin in accordance with Mil-R-9299.

There are some other notes discussing the cure and post of the material.  If
you find someone interested, I will send them the drawing."

It's going to be a very small amount of the material...I'll post the size of
the billet later. I tried to call the engineer a few minutes ago and find out
the size, but he's out at lunch.

If anybody can help, it sure would be appreciated.

-Steve Gregory-

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------