I have puzzled over this one for years, and finally realized one reason why
there are differences in the numbering of diodes.

First - I number diodes as Pin1 = Cathode.

That being said, I discovered that those that use Spice (or a derivative
thereof - I.E. Circuit simulation) seem to number diodes with Pin1 = Anode.

You may also discover this to be true.

Regards,

James Jackson
Oztronics


----- Original Message -----
From: "Brionez, Gregory" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, October 25, 2004 1:22 PM
Subject: [DC] Pin Numbering Question


> ??? Survey Says
>     Do you use pin one of a Diode package to indicate...
>
> 1. The Anode
> 2. The Cathode.
>
>
> Thanks
>   <http://www.mpcproducts.com/spacer.gif>
>   <http://www.mpcproducts.com/spacer.gif>
>   <http://www.mpcproducts.com/spacer.gif>
>   <http://www.mpcproducts.com/spacer.gif>
> Paul Brionez -  <mailto:[log in to unmask]> CID
> [log in to unmask]
> PCB Designer
> PH: 847-673-2718 x1394
> FAX: 847-673-9789
> DIVISION: Electronic/Systems
>
>  <http://www.mpcproducts.com/> MPC Products Corporation
> ISO 9001 Certified
> Skokie, IL USA    <http://www.mpcproducts.com/>
>   <http://www.mpcproducts.com/spacer.gif>
>   <http://www.mpcproducts.com/spacer.gif>
>
>
> ***************************************************************
> This message and any attachment are confidential and may be
> privileged or otherwise protected from disclosure.  If you are
> not the intended recipient, you must not copy this message or
> attachment or disclose the contents to any other person.  If
> you have received this in error, please email the sender or
> telephone in the United States at (847) 673-8300 and delete
> this message and any attachment from your system.  For further
> information about MPC Products Corporation please see our web-
> site at http://www.mpcproducts.com or refer to any MPC Products
> Corporation office.
> ***************************************************************
>
>
> --------------------------------------------------------------------------
-------
> DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
> To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
> --------------------------------------------------------------------------
-------
>

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------