Subject: | |
From: | |
Reply To: | |
Date: | Fri, 8 Oct 2004 08:55:18 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
And what are you going to do to reduce the surface tension of the rinse
water? I usually use humor to reduce the tension, but it won't work in this
situation.
Dewey
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Precision Lab
Sent: Friday, October 08, 2004 7:54 AM
To: [log in to unmask]
Subject: Re: [TN] Soldering .8mm BGAs
Hello Al,
>
One quick thought I had with regard to your cleaning question is that
although OA materials are usually water soluble, it might be that with a
low stand-off part such as a BGA that the surface tension of water
(approx. 73 dyne) may be to high to reach underneath the part. Straight
DI water wash may not be effective enough. One option might be to add a
bit of saponifier to the wash. Many saponifiers help to reduce the water
surface tension and can aid the process for more effective cleaning
underneath components. My two cents!
Joe Russeau
Process Analyst
Precision Analytical Laboratory
Hello Technetters:
>
> Processing a 16"x20", .125" thick double-side mixed-tech (smt both sides,
> and pth component side) with at least two .8mm BGAs with .45mm balls:
>
> one is a 84 pin package is a 9 x 15 - 135 - ball matrix with 51
> depopulated balls in the center of the package
> the other is a 8 x 12 - 96 ball - matrix with 8 depopulated balls - 4 at
> either end of the matrix
>
>
> Two quick questions:
>
> Can I clean (in-line) using di water only if I use OA flux? Or, do I need
> to switch to no-clean for BGAs less than 1mm?
> For rework, flux only? Or can I micro-stencil or dispense?
>
>
> As always, thanks in advance for your replies,
>
>
> Al Kreplick
> Sr. Mfg. Eng.
> Teradyne, Inc.
> 500 Riverpark Drive
> Mail Stop NR500 1-1
> North Reading, MA 01864
> Tel: 978-370-1726
> Pager: 888-561-6485
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> -----------------------------------------------------
> PS: Go Red Sox!
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|