I have no problem interpreting the diode polarity based on the silkscreen. I
guess the confusion arises for some because diode silkscreen is placed a bit
far away and the line - cathode happen to be next to the left pad. To some,
they treats the pad on the left to be for cathode.
The confusion could be easily resolved by placing the silkscreen above the two
pads. No need for square pad for anode.
> Mornin' All!
>
> There's been a pretty interesting thread going on in the Designers Council
> about what is supposed to called pin 1 of a diode...the Anode or the Cathode.
> Believe it or not, there's been conflicting answers. So I'd like to do a
> little test.
>
> Look at:
>
> http://www.stevezeva.homestead.com/files/LEDPin1.jpg
>
> and tell me if we installed this LED correctly.
>
> Then look at:
>
> http://www.stevezeva.homestead.com/files/LEDPolarity.jpg
>
> and tell me if this this illustration guide I made for our operators is
> correct.
>
> (This ought to be good)
>
> -Steve Gregory-
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
