Subject: | |
From: | |
Reply To: | |
Date: | Tue, 28 Sep 2004 14:27:40 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Tony
I would use a 6 mil stencil. We only use 6 mil stencils for soldering,
and tweak the aperture reductions as needed. The board you've described
is typical of our builds.
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Tony Steinke
> Sent: Tuesday, September 28, 2004 12:51 PM
> To: [log in to unmask]
> Subject: [TN] stencil thickness
>
>
> Question?
>
> What thickness stencil do you recommend on a 6"x8"
> board with mostly 0603's and a couple of PQFP128's.
> The pads on the PQFP are 12 x 63.
>
> TIA
>
> Tony Steinke
>
regards,
Graham Collins
Process Engineer,
Northrop Grumman Canada Corporation
Halifax
(902) 873-2000 ext 6215
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|