Thanks that is what I needed.
ALIEN TECHNOLOGY CORPORATION
Jeff R. Cole
Sr. Engineering Tech.
18220 Butterfield Blvd
Morgan Hill, CA 95037
Ph. (408) 201-7476
Fax (408) 778-2411
The PROPRIETARY and CONFIDENTIAL data attached to this email represents an electronic form of Alien Technology Corporation ("Alien") proprietary and confidential Design Information.
If the reader of this message is not the intended recipient, or the employer or agent responsible for delivery of it to the intended recipient, you are hereby notified that any dissemination, copying, or use of this communication is neither intended or permissible. If you have received this transmission in error, please immediately notify us by telephone and immediately delete and destroy the original message and any copies of the original message.
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks,Bill
Sent: Wednesday, September 08, 2004 9:46 AM
To: [log in to unmask]
Subject: Re: [DC] IPC-610
Hi Jeff,
The nominal target length is 1.0mm
Max Lead protrusion according to IPC-A-610C from table 5-2,
Class 1 = no shorts, Class 2 = 2.5mm, Class 3 = 1.5mm
Hope that helps...
Best regards,
Bill Brooks
PCB Design Engineer , C.I.D., C.I.I.
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
http://pcbwizards.com
-----Original Message-----
From: Jeff Cole [mailto:[log in to unmask]]
Sent: Wednesday, September 08, 2004 9:18 AM
To: [log in to unmask]
Subject: [DC] IPC-610
My copy of IPC-610 has disappeared.
Can you please tell me what the recommended max lead protrusion on an
assembly is. Is it possible to scan me a copy of that page? I need some
back up material.
ALIEN TECHNOLOGY CORPORATION
Jeff R. Cole
Sr. Engineering Tech.
18220 Butterfield Blvd
Morgan Hill, CA 95037
Ph. (408) 201-7476
Fax (408) 778-2411
The PROPRIETARY and CONFIDENTIAL data attached to this email represents an
electronic form of Alien Technology Corporation ("Alien") proprietary and
confidential Design Information.
If the reader of this message is not the intended recipient, or the employer
or agent responsible for delivery of it to the intended recipient, you are
hereby notified that any dissemination, copying, or use of this
communication is neither intended or permissible. If you have received this
transmission in error, please immediately notify us by telephone and
immediately delete and destroy the original message and any copies of the
original message.
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|