Scott,

The Democrats would do it this way... while the Republican would do it
this way.... And if you loved your country you would do it this way...

Sorry, couldn't resist.

Just how complex is this board?  How many components?  If it is simple
and small and you have lots of patience, you might be able to buzz it
out.

Is this their design?  Are there any markings on the board that might
lead you to the PCB Fabricator?

Unfortunately, you instinct to punt may be the most prudent action.

Best of luck,
Joe

-----Original Message-----
From: Scott Riley [mailto:[log in to unmask]] 
Sent: Thursday, September 16, 2004 12:48 PM
To: [log in to unmask]
Subject: [DC] A Reverse engineering question

I hate to switch gears on everyone, but I'm looking for a little input
on a
job.
 
A customer sent me a 6 layer board (complete with all the components on
both
sides) and wants to know if I can create  data from it so that he can
order
more.  I have done several two layer boards as well as a couple simple
four
layer designs, but six layers presents some problems. There is no
documentation (schematic, fab drawings, etc) and no manufacturing data. 
 
Does anyone have any experience or suggestions on how this might be
accomplished ? Of course the customer wants it immediately and for
cheap,
but before I NO QUOTE this one I thought I'd get some input from the the
experts.  Thanks in advance for your help.. 

Scott D. Riley
Technical Design Service
607-658-9322 - Office
607-785-1696 - FAX
 <http://www.techdesignservice.com/> www.techdesignservice.com

 

 

 

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------