TECHNET Archives

August 2004

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jeffrey Bush <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Jeffrey Bush <[log in to unmask]>
Date:
Mon, 30 Aug 2004 08:26:55 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (74 lines)
Of several, 2 main factors - application method and size of via.
Curtain and screen applications tend to move more material into the via
and provides a good base to remain there after image and develop.  Spray
coaters apply a more controlled coating that generally leave the hole
free of mask.  Each type of coating methodologies also have ranges of
material application thickness that will also affect the plugging of the
via.  The second variable if the via size, which can vary by fabricator
- some may drill at different sizes depending on pad-to-hole
capabilities and processing needs.  Smaller vias will plug more readily
than larger.  It is possible that each fabricator is using different
application methods and/or via sizes. 

If plugging is important, I would make sure that this condition is
stated on the drawing - ie. "All vias covered by mask to be plugged".
This will allow the fabricator to apply the required processes to ensure
plugging.  



Jeffrey Bush
Director, Quality Assurance and Technical Support

                          76 Technology Drive - POB 1890
                             Brattleboro, Vermont 05302-1890
                                Tel. 802.257.4571.21 Fax. 802.257.0011
                                    [log in to unmask]
                              http://www.vtcircuits.com	



-----Original Message-----
From: Cal Driscoll [mailto:[log in to unmask]] 
Sent: Friday, August 27, 2004 1:15 PM
To: [log in to unmask]
Subject: [TN] tented Via


Hello All-

I am not a board fab person but would like to understand why some LPI
masking processes can not tent vias (non filled).

We have a board house that can tent vias with no issues. When we went to
another board house the are unable to tent vias. Both shops are huge and
have international locations. I would think the technology would be
there to do this.

thanks in advance,
Cal
www.ctdi.com

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2