We are using a multilayer FR4 board with 12 mils between layers and getting
breakdown between traces on different layers. The voltage is about 3500 V
peak. THis board should be good for 740 V/mil x 12 or 9 KV. I wonder if
it is excessive leakage due to moisture absorption?
Bill
Bill Higinbotham
RFL Electronics Inc.
E-mail : [log in to unmask]
Voice: 973.334.3100 Ext. 386
Fax: 973.334.3863
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------