In a message dated 8/27/2004 11:17:50 AM US Eastern Standard Time,
[log in to unmask] writes:
Set peak temp between 210 - 240 deg C
Adjust melting time over 200 deg C for 20 to 60 seconds
Ramp rate < 4 deg C
I don't think the peak is necessarily high, if you are in the lower end of
that range. 215 - 218 C is about normal for my experience for a peak, and 45
seconds above liquidus seems normal.
Jon Moore
.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------