Subject: | |
From: | |
Reply To: | |
Date: | Tue, 17 Aug 2004 08:59:03 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Interesting to see answers, Victor,
we use Mitotuyo's std microhardness tester with Vicker diamond. We found that it's necessary to perform two measurements,
one with just 25 gram force, and one with say 300 gram force. That way we can get an image of the very surface (for wire bonding, for instance)and next, bulk hardness down to barrier, or whatelse is under the gold. Soft and pure gold for wire bonding seems to be some 80-100 HV. Cobalt gold and other doped golds can show from 150 and up to 300 HV. Best combination is said to be a measurement with both Vickers and Knoop.
A good page is this: http://www.gold.org/discover/sci_indu/GTech/1998_24/Brazing.pdf
and standards may be found on this one: http://ts.nist.gov/ts/htdocs/230/232/COMMON/VIEW_NEWSRM.CFM
Ingemar Hernefjord
Ericsson Microwave Systems
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Victor G. Hernandez
Sent: den 16 augusti 2004 19:29
To: [log in to unmask]
Subject: [TN] Hard Gold Plating Hardness
Steven,
Do you have any experience measuring gold hardness.
If so what equipment is used beside mechanical hardness stylus.
Can gold hardness be measured with the used of XRF system.
Are standards available for gold hardness?
Victor,
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|