Roger,
I'm thinking that purchasing can't be allowed to change board houses unless
the new board house can build the board with the same stack up. I know that
in qualified military hardware this change could not be allowed because the
new board is not the same as the one that was qualified. We would have to do
a "delta" qual test that would be agreeable to all parties involved.
When changing board stackups with a qualified design, then the cost of a
"delta" qual test must be subtracted from the cost savings incurred in the
first place. Then only a true measure of savings would be realized. You'll
generally find that you'll be ahead of the game if you stick with the
original stack up.
My 2 cents worth.
Bill Kasprzak
Moog Inc., Systems Group, Process Engineer
-----Original Message-----
From: Roger Stoops [mailto:[log in to unmask]]
Sent: Tuesday, July 13, 2004 9:05 AM
To: [log in to unmask]
Subject: [TN] Board Stack geometry
This brings up a question I have had bumping around in my head for a while,
for example:
A pcb has been designed, assembled, tested, and now goes through FCC and CE
emissions and susceptibility testing. The board stack was determined by the
pcb vendor. The assembly passes first time. Purchasing or the EMS finds a
less expensive yet reliable board house and buys production boards from this
new house. The new house changes the board stack to their preferred lay-up.
Would not this board need re-testing for FCC/CE emissions/susceptibility?
For boards requiring this type of testing, would not a board stack specified
on the print be required?
TIA and much appreciated,
Roger Stoops
-----Original Message-----
From: Jeffrey Bush [mailto:[log in to unmask]]
Sent: Monday, July 12, 2004 8:40 AM
Subject: Re: 7628 prepreg?
Common type, stable, low resin content and likely predicable thickness
is this is important. Otherwise PCB house should be left to determine
the optimal stack for the board geometry and end use.
Jeffrey Bush
Director, Quality Assurance and Technical Support
76 Technology Drive - POB 1890
Brattleboro, Vermont 05302-1890
Tel. 802.257.4571.21 Fax. 802.257.0011
[log in to unmask]
http://www.vtcircuits.com
-----Original Message-----
From: Brooks,Bill [mailto:[log in to unmask]]
Sent: Friday, July 09, 2004 5:08 PM
To: [log in to unmask]
Subject: [TN] 7628 prepreg?
Bill Brooks
PCB Design Engineer , C.I.D., C.I.I.
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510 http://pcbwizards.com
Why would a designer specify 7628 prepreg in the construction of a
board? What characteristics are unique to it? Bill Brooks, CID
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
