The process is setup to check the first 3 or 5 parts off a reel, I suppose
you could check every part but the time would be unreasonable. The cracks in
our experience do not become apparent until the reflow process when heat is
applied exposing the material to stresses. We are a MY12 user but this was
not a feature of the equipment as explained to us.
Dave C.
CSI
-----Original Message-----
From: Tom Parkinson [mailto:[log in to unmask]]
Sent: Wednesday, July 07, 2004 12:44 PM
To: [log in to unmask]
Subject: [TN] Mydata Info


One of our customers has said their other CM uses a Mydata SMT pick and
place system that has the 'on-the-fly' testing. From what our customer says,
this testing will catch all marginal passive parts, including any SMT caps
that may have very small cracks.



Anyone have experience with this 'on-the-fly' testing option?



Tom Parkinson - Quality System Manager - CIT

WinTronics, Inc.

Ph: 724-981-5770 Ext. 235

Fax: 724-981-1772




---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------