-----Original Message-----
From: Brooks,Bill
Sent: Tuesday, July 06, 2004 1:18 PM
Subject: FW: TONIGHT!!! SDDC Meeting Embedded Passives
Last Reminder -
The meeting is Tonight! This is it... don't forget the seminar on Embedded
Passives is at Overland Storage tonight at 5:30PM to 9:00PM. Get there
early!
You won't want to be late. This is a different format than we have done in
the past. The meeting is earlier to allow for the 3 hour seminar. We will
have food and refreshments at the mid break... and coffee and dessert - so
Don't eat before you come... we will have plenty of food, courtesy of
Coretec.
We ordered extra food so don't hesitate to bring a friend... take advantage
of this great opportunity to get the inside track on adding embedded
resistors and caps and other passive devices to your boards. Save space on
that next tight high volume board design, be able to show the engineers how
they can do it, what the pro's and con's are, and how they can make your
design a success!
We look forward to seeing you there.
Best regards,
Bill Brooks
PCB Design Engineer , C.I.D., C.I.I.
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
-----Original Message-----
From: Brooks,Bill [mailto:[log in to unmask]]
Sent: Tuesday, June 22, 2004 3:42 PM
To: Brooks,Bill
Subject: FW: SDDC Meeting Announcement July 6th, 2004 - Embedded Passives
SDDC Meeting Announcement July 6th, 2004 - Embedded Passives
-YOU ARE INVITED TO ATTEND-
San Diego Chapter of the IPC Designers Council is pleased to present the
following:
Tuesday July 6th, 2004 @ 5:30PM
Richard Snogren
of
CORETEC
presenting
A COURSE ON EMBEDDED PASSIVES
Learn How to Embed Resistors and Capacitors in Your Printed Circuit Boards
Now!
"While CAD tool providers are working on tool solutions, there is an interim
gap. This gap can be easily bridged by a manual process within existing CAD
tools. This course will teach the participants how to design discrete
capacitors and resistors with commercially available materials that can be
readily embedded into the PCB by the board manufacturer.
The 3 hour course includes a review of available embedded passive resistor
and capacitor materials and their related manufacturing processes. It will
also provide an association of design rules and manufacturing processes. The
primary focus of the course is to provide "how to" guidelines for PCB
designers to implement embedded passives now. It includes a technology
selection process, how to create parts, how to embed them and how to bridge
the design tool gap."
About Richard Snogren:
Richard Snogren has a Bachelor of Science degree in chemistry and biology
and over thirty-five years experience in engineering and management. During
that period, Richard developed and patented ablative materials for military
and aerospace use; authored numerous papers and articles on structural and
dielectric materials for electronic applications; and wrote a compressive
technical book entitled "Handbook of Surface Preparation for Adhesion".
Richard is also a member and active participant in the Advanced Embedded
Passives Technology (AEPT) research consortium, funded by the US government.
He has researched and developed processes for embedding ceramic thick-film
materials into organic PCB substrates. He has authored numerous papers and
conducted many workshops on embedded passive technology.
Snogren was co-founder and president of SAS Circuits (now Coretec Denver) a
respected supplier to the aerospace and defense sectors of the PCB industry.
Currently Richard is senior staff engineer for Coretec Inc., an
Interconnection Manufacturing Service (IMS) provider. His responsibilities
include implementation of embedded passives, as well as high reliability
aerospace product development.
Some comments from former attendees:
"Your presentation was very helpful for me to understand the current
embedded-passive technology... I'd like to share my learning experience with
my colleagues." - Changsup Ryu, Principal Engineer/ Ph.D., SAMSUNG
ELECTRO-MECHANICS CO., LTD.
"I very much enjoyed the workshop you presented...It was very informative
and provided me with a good foundation for this emerging technology... Once
again thank you for your presentation." - Gregory Phipps - Design Manager,
Advanced Interconnect Technologies, Inc.
MARK YOUR CALENDAR!!! This meeting is a 'must not miss' chance for you to
get all of the detailed information on how to conquer the space limitations
of that next design with embedded passives! This complimentary course is
being presented by CORETEC and your IPC Designers Council Chapter as part
of their continuing educational outreach to designers and engineers. Don't
miss this opportunity.
Meeting Agenda:
5:30PM - Announcements and introduction
5:40PM - A Course on Embedded Passives - Richard Snogren
7:00PM - Break with refreshments
8:50PM - Questions and Answers
9:00PM - Adjourn
Hosted by the San Diego Chapter of the IPC Designers Council
This event will be held at:
Overland Storage
4820 Overland Avenue
San Diego, California 92123
1-800-729-8725
1-858-571-5555
Directions:
From Los Angeles:
From the 5 Fwy south, take the 805 Fwy South exit on the left.
Approximately 6 miles later, exit at the Clairemont Mesa Blvd.
West/Clairemont Mesa Blvd. East exit. Go East. Turn right onto
Clairemont Mesa Blvd. Turn right onto Overland Avenue. Overland
Storage is located on the right side of Overland Avenue.
From the Border on I-5 North:
From the 5 Fwy North, take the 15 Fwy North exit towards
Riverside for approx. 3 miles. Then take the 805 Fwy North exit
towards Los Angeles. Turn a slight left at the intersection of
I-8 East/I-8 West ramp to stay on the 805 Fwy North. Take the
163 Fwy North towards Escondido. Exit at the Clairemont Mesa
Blvd. West/Clairemont Mesa Blvd. East exit. Go East. Keep right
at the fork in the ramp. Turn right onto Clairemont Mesa Blvd.
Turn right onto Overland Avenue. Overland Storage is located on
the right side of Overland Avenue.
From I-15 going South:
Take the Clairemont Mesa Blvd. exit and turn right onto
Clairemont Mesa Blvd. Turn left onto Overland Avenue.
Overland Storage is located on the right side of Overland Avenue.
RSVP to <mailto:[log in to unmask]> mailto:[log in to unmask] by Monday, July
5th, 2004.
IPC Designers Council Members will be admitted free of charge, Non-Members
will be asked to contribute a $5.00 donation at the door. Contributors will
get a $5.00 discount applied to their membership should they decide to join
the IPC Designers Council at the event.
More information about the IPC Designers Council is available on-line at
<http://www.ipc.org/SanDiego/> http://www.ipc.org/SanDiego/ or
<http://dc.ipc.org/> http://dc.ipc.org/
Bill Brooks
PCB Design Engineer , C.I.D., C.I.I.
TITAN CORPORATION
DATRON WORLD COMMUNICATIONS DIVISION
3030 Enterprise Court, Vista, CA 92083
Email: <mailto:[log in to unmask]> [log in to unmask],
<mailto:[log in to unmask]> [log in to unmask]
Website:
<http://www.titan.com/business_units/index.html?organization_id=81Tel>
http://www.titan.com/business_units/index.html?organization_id=81
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
_______________________________________
Member of the San Diego Chapter of the IPC Designers Council
Communications Officer, Web Manager
<http://dcchapters.ipc.org/SanDiego/http:/pcbwizards.com>
http://dcchapters.ipc.org/SanDiego/
http://pcbwizards.com
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
