Hi Royce,

I have a Soltec 6721 Delta C and here is how you correct the width
adjustment.

1.  Turn on the parameters by clicking on Setup/Parameters
2.  Click on yellow box by Width, it will bring up the conveyor width screen
3.  You will see the Setpoint (S.P.) and Measured value numbers (M.V)
4.  What you need to do is change the M.V. number, so with a ruler measure
the conveyor width you actually have and then change the number to that
value.

Congrats you have now calibrated your conveyor. (I hope)

Regards,
Richard


-----Original Message-----
From: Taylor, Royce [mailto:[log in to unmask]]
Sent: Monday, April 12, 2004 8:47 AM
To: [log in to unmask]
Subject: [TN] Vitronics Soltec Maxi Wave # 6522CC


Folks

I have recently inherited a Soltec Maxi Wave model # 6522CC. My issue is
that the width adjustment is off and I would like to correct it.
If anyone has knowledge how to do this within the software can you please
let me know?? The width adjust shaft has an encoder on it and there are
micro switches on the offload end of the machine that the movable rail hits
as it moves. The manuals do not indicate how to correct and I want to try to
fix this without taking off the encoder, moving the width and then
reinstalling the encoder....

Thanks in advance

Royce
*************************************************************************
Royce Taylor
Process Engineering/Production
Suntron Corporation NEO
104 Glenn Street
Lawrence, MA 01843
(978)747-2061 voice
(978)747-2010 fax
[log in to unmask]

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------