Folks

I have recently inherited a Soltec Maxi Wave model # 6522CC. My issue is that the width adjustment is off and I would like to correct it. 
If anyone has knowledge how to do this within the software can you please let me know?? The width adjust shaft has an encoder on it and there are micro switches on the offload end of the machine that the movable rail hits as it moves. The manuals do not indicate how to correct and I want to try to fix this without taking off the encoder, moving the width and then reinstalling the encoder....

Thanks in advance

Royce
*************************************************************************
Royce Taylor
Process Engineering/Production
Suntron Corporation NEO
104 Glenn Street
Lawrence, MA 01843
(978)747-2061 voice
(978)747-2010 fax
[log in to unmask]

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------