I have a customer who is designing in an IBM PowerPC 440GP embedded
processor in a 552 ball CBGA package. Due to routing constraints, he
needs to increase the space between pads of some outer perimeter pads.
IBM's recommended pad size is 27.5 mil, 40 mil pitch.. As this is a
CBGA, IBM has done extensive reliability studies to come to this pad
size. My customer is thinking of changing some of the pads to an oval
shape to increase the gap size but also to retain the same solder volume
in the hopes that this will be an equivalent pad in terms of long term
reliability.
Has anyone tried this with success? Any other suggestions?
Thanks
Peter
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------