Hi Francis,

We just received a system from Intelligent Vision Solutions, www.visionneeds.com, and it seems to be pretty solid. We don't have a lot of time with it yet but what we've see so far we like.

With a doubler it goes to about 175X which is plenty for our application. You can zoom it out to get a picture of a CCA about 8" X 10" which is a pretty incredible range. It has an S-video out that can plug directly into an S-video ready monitor or a digitizing card.

There is a learning curve to getting the best picture but not too bad. If you are doing extreme close up you need a really solid surface.

They seem to be a small operation but the owner, Chuck, is very responsive and prides himself in putting out a good, solid product.

That's about all I know for a Friday.

KennyB

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Francis Sun
Sent: Thursday, March 18, 2004 3:28 PM
To: [log in to unmask]
Subject: [TN] Any recommendation on a vision inspection system for
components (placement and value) as well as solderjoints quality?


Hi Technet,

Any recommendation on a vision inspection system for components (placement
and value) as well as solderjoints quality?
Will consider all suggestions, in-line/stand-alone.
Also be interested on hearing the Pros and Cons.

Thanks in advance.

Regards;

Francis Sun
MARK IV Industries

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------