TECHNET Archives

March 2004

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Crepeau, Phil" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 11 Mar 2004 07:47:22 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (60 lines)
hi,

you've got a problem, no?  i think solder preforms could be used for the wire wrappable tails.  amp used to have good application notes on this.  personally, i have never done it.

another thought.  the connector vendor should have good application notes for this.

phil

-----Original Message-----
From: Steve Gregory [mailto:[log in to unmask]]
Sent: Thursday, March 11, 2004 7:37 AM
To: [log in to unmask]
Subject: [TN] How would you solder this Backplane?


Mornin' All!

One of the guys from our bid department asked me to come and look at a
backplane we're bidding on, and tell him how we would solder it? I went and looked
at it, and I'm not sure how we would. Go to http://www.stevezeva.homestead.com
and take a look at Backplane Topside, Backplane Backside, and Backplane
Backside Leads.

The leads for all the connectors protrude at least a half inch or longer out
the bottom of the board. I'm assuming they are that long because they get wire
wrapped after the backplane is assembled. But how do you solder something
like that? Some sort of dip solder pot? Drag solder? I don't think I'm going to
be able to solder a board with leads that long in our Electra wave solder.

I can tell board was mass soldered, and I'm thinking it was dipped somehow.
Because you can see tiny little peaks on most of the lead tips that go straight
up and down. Is there such thing as some sort of dip solder machine?

Sorry for all the dumb questions, but I've never been around a backplane like
this, and don't really know how something like this gets built.

Thanks!

-Steve Gregory-

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2