Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 11 Mar 2004 11:22:04 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You're going to cringe at this (I did), but when I ran a shop back in the
eighties, we built instrument panel assemblies for Kenworth trucks that used
similar connectors. The process was developed by the previous vendor and
transferred to us when we won the job. We used custom made solder preforms
then baked them in plain old Black and Decker toaster ovens. Once we
figured out the temperatures and times, the yield was pretty much 100%.
Laugh all you wish, but it was a good job and the customer was happy.
Still, unless they give you a lot of leeway, I'd no-bid.
Bob Croslin
Nielsen Media Research
-----Original Message-----
From: Steve Gregory [mailto:[log in to unmask]]
Sent: Thursday, March 11, 2004 10:37 AM
To: [log in to unmask]
Subject: [TN] How would you solder this Backplane?
Mornin' All!
One of the guys from our bid department asked me to come and look at a
backplane we're bidding on, and tell him how we would solder it? I went and
looked
at it, and I'm not sure how we would. Go to
http://www.stevezeva.homestead.com
and take a look at Backplane Topside, Backplane Backside, and Backplane
Backside Leads.
The leads for all the connectors protrude at least a half inch or longer out
the bottom of the board. I'm assuming they are that long because they get
wire
wrapped after the backplane is assembled. But how do you solder something
like that? Some sort of dip solder pot? Drag solder? I don't think I'm going
to
be able to solder a board with leads that long in our Electra wave solder.
I can tell board was mass soldered, and I'm thinking it was dipped somehow.
Because you can see tiny little peaks on most of the lead tips that go
straight
up and down. Is there such thing as some sort of dip solder machine?
Sorry for all the dumb questions, but I've never been around a backplane
like
this, and don't really know how something like this gets built.
Thanks!
-Steve Gregory-
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|