Sender: |
|
X-To: |
|
Date: |
Fri, 19 Mar 2004 19:41:36 EST |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="US-ASCII" |
From: |
|
Parts/Attachments: |
|
|
You might think this is a joke, but the first time I ever seen BGA's being
re-balled with Solderquick pre-forms, was at a SMI show in San Jose using a
horizontal Bagel Toaster.
Heat is heat, right? It did the job...and did it good too.
-Steve Gregory-
Where do I hook up the nitrogen?
Mike McMaster
RF Product Engineer
Merix Corporation
503-992-4263
> ----------
> From: David Fish[SMTP:[log in to unmask]]
> Sent: Friday, March 19, 2004 12:24 PM
> To: TechNet E-Mail Forum.; Mcmaster, Michael
> Subject: Re: [TN] Batch Reflow Ovens
>
> Michael:
>
> Try Wal-Mart. Look here:
> http://www.stencilsunlimited.com/index.php?page=ovens_profiles
>
> Dave Fish
>
> ----- Original Message -----
> From: "Mcmaster, Michael" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, March 18, 2004 3:03 PM
> Subject: [TN] Batch Reflow Ovens
>
>
> > I'm looking into purchasing a small benchtop reflow oven. Not sure at
> this
> > point if it's going to be batch or conveyorized.
> >
> > I'd use it for sweat soldering pallets and heat sinks to PWBs. Ideally
> I'd
> > like something capable of doing reflow of lead free solder on a 12x12
> > board.
> >
> > I'd appreciate any recommendations or experience with different
> > models/manufacturers equipment. Feel free to contact me off line.
> >
> > Thanks in advance for your help.
> >
> > Mike McMaster
> > RF Product Engineer
> > Merix Corporation
> > 503-992-4263
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|