Content-type: |
text/plain; charset=us-ascii |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 16 Mar 2004 07:50:58 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Donald-
Under the theory that a bad answer is better than no answer at all.... we
just use an iron core inductor symbol for ferrite beads.
-Chris (el CID)
Donald Kyle
<[log in to unmask] To: [log in to unmask]
SLB.COM> cc:
Sent by: DesignerCouncil Subject: [DC] ANSI Y32.2 1975
<[log in to unmask]>
03/12/2004 04:00 PM
Please respond to
"(Designers Council
Forum)"; Please respond to
Donald Kyle
Hello Designer Council Members,
The reason that I asked about ANSI Y32.2-1975 was because I was looking for
the correct Graphic Symbol for a SURFACE MOUNT FERRITE BEAD. Such as found
at http://www.murata.com/ninfo/nr0341e.html
In ANSI Y32.2-1975, there is a symbol for a FERRITE BEAD RING (15.18.1
general and 15.18.2 application with equivalent LC circuit.
Would these be correct for the above ferrite bead or is there another
symbol used?
When I first got into electronics, we called one Hertz one CPS. So I was
thinking (I know, I shouldn't do that) that maybe there is a new symbol for
this ferrite bead. After all, the first ferrite bead I came across was
about three-quarters of an inch in diameter with a 18AWG wire running
through it.
Thanks
Donald Kyle C.I.D.+
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
---------------------------------------------------------------------------------
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|