Suzanne,
I was not referring to you as the supplier, as I understood that you were
having a problem, but to the gentleman that was not giving his inputs but
was only commenting on the inputs from others that were trying to help. "Wow
put your claws in" I did not see him add any suggestions or make any
recommendations. Only questioned or made comments to those that did This
forum is for asking questions and seeking information. When our fellow
techneters put in their two cents they should not be subjected to that. If
you have a comment that will help someone resolve a problem then by all
means you should be free to express it and if not, follow the advise of your
mother, " if you can say anything nice don't say anything at all". Sorry for
the misunderstanding
----- Original Message -----
From: "Suzanne Foulkes" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, February 10, 2004 7:26 AM
Subject: Re: [TN] Solder Mask Flaking
Scott, I am not the supplier I apologize if anyone thinks I am coming
across defensively I just am who I am. Quality Manager for AESCO Mfg. in
Ohio. Phone # 330-245-2630 ext.112
-----Original Message-----
From: Scott B. Westheimer [mailto:[log in to unmask]]
Sent: Monday, February 09, 2004 6:41 PM
To: [log in to unmask]
Subject: Re: [TN] Solder Mask Flaking
I am not sure but from your postings you are coming across very
defensively. From the responses I have seen that ADDRESS the issue it
seems that they all agree that the problem is more processing of the
board suppliers, i.e., surface prep, cure temperature, rework, mixture,
cure and tack time,etc. and not assembly related. What is your problem?
Are you the supplier? Claws no where to be found!
----- Original Message -----
From: "Franklin D Asbell" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, February 09, 2004 6:00 PM
Subject: Re: [TN] Solder Mask Flaking
> Okay, and those times not 'most often' what are the causes in your
> experience, of flaking mask?
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
> or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-509-9700 ext.5315
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
