Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 24 Feb 2004 09:06:08 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dave,
Our Maintenance Guy poured a pad and ran
plumbing in about 8 hours total time. I'm not sure
what we paid for the two bags of concrete, as they
were laying around from a previous project. A little wood
framing, and the pad was complete.
The plumbing was just straight through an outside
wall, and the freezer was in a room just inside said wall. You
may need to consider more hours labor if your equipment is
in "the middle" of your building.
We are using CO2 for a freezer, but I would assume
the costs would be comparable.
We have a lease with a local company for about $500
per year, and about $90 for each re-fill. I'm not sure what the
tank capacity is - its about the size of two 55 gallon containers
stacked.
I'd say closer to a 1K investment, depending on you labor rates!
Hope this helps,
Dave
At 01:22 PM 2/23/2004, you wrote:
>> -----Original Message-----
>> From: Dave Chapman Circuit Service [log in to unmask]
>> Sent: Monday, February 23, 2004 1:26 PM
>> To: [log in to unmask]
>> Subject: [TN] Nitrogen
>Does anyone have a ballpark figure for installing a Nitrogen tank on a pad
>outside our building? We have two ovens and two wave machines and with Lead
>Free we anticipate higher usage and we are thinking to go big on Nitrogen
>rather than the tanks we now use. Is it a 10K investment or 100K?
>Dave Chapman
>CSI
Dave Dixon
Engineering Technician
Aero-Mach Labs Inc.
7707 E. Funston
Wichita, KS 67207-3121
phone (316) 219-2243
fax (316) 219-2295
www.aeromach.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|