Following on from these comments from Paul I would be interested to get
some comments on what people understand by the terms used in this EU
proposed definition of impurity level. i.e. what is;
1. a homogeneous material?
2. a unit?
3. mechanical separation?
4. a single material?
It seems there are many different interpretations of this and I am
trying to discover which ones are most generally accepted. E.g. Paul
indicates in his message that a complete component is seen as
homogeneous since it may be difficult to mechanically separate. Others
seem to believe a unit is a complete circuit board, but it is also
possible that homogeneous means each material used to make up a
component.
Any comments? I would really like to get this clarified.
thanks
Kay Nimmo
-----Original Message-----
From: Paul Chinery [mailto:[log in to unmask]]
Sent: 28 January 2004 09:34
To: [log in to unmask]
Subject: Re: [LF] Understanding Homogenous term
Hi Cliff
In December 2003, the European Commission released the following
statement:
"The commission services have prepared a draft Commission decision
establishing maximum concentration values pursuant to Article5(1)(a) of
Directive 2002/95/EC. The proposed values have been discussed at the
Technical Adaptation Committee (TAC) meetings this year."
The values they refer to are the 0.1% for lead, mercury, hexavalent
chromium, PBB and PBDE and 0.01% for cadmium. They go on to clarify the
term homogeneous:
"Homogeneous material means a unit that can not be mechanically
disjointed in single materials".
To answer your question, my understanding is RoHS applies to each and
every individual component, as an assembly can be separated.
Kind regards
Paul Chinery
Dionics plc
www.pb-free.info
T : +44 (0)2476 713366
F : +44 (0)2476 714488
-----Original Message-----
From: Leadfree [mailto:[log in to unmask]]On Behalf Of Cliff Knudson
Sent: 27 January 2004 18:59
To: [log in to unmask]
Subject: [LF] Understanding Homogenous term
Hi folks,
Sorry if this has been covered. But I am currently discussing the .1%
lead by weight directive from EU. What is the majority view regarding
the definition of homogenous? If I build an assembly with soldered
components is this EU directive referencing the capacitor or assembly
level? I am assuming the component versus assembly.
Thanks,
Cliff Knudson
Component Engineer - Nokia
650-625-2245
------------------------------------------------------------------------
----
---Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree To temporarily stop
delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL Search
previous postings at: http://listserv.ipc.org/archives Please visit IPC
web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-509-9700 ext.5315
------------------------------------------------------------------------
----
---
------------------------------------------------------------------------
-------Leadfee Mail List provided as a service by IPC using LISTSERV
1.8d To unsubscribe, send a message to [log in to unmask] with following
text in the BODY (NOT the subject field): SIGNOFF Leadfree To
temporarily stop delivery of Leadree for vacation breaks send: SET
Leadfree NOMAIL Search previous postings at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
------------------------------------------------------------------------
-------
-----------------------------------------------------------------------------------------------------------------
Tin Technology Ltd & ITRI Limited
Unit 3, Curo Park
Frogmore
St Albans
Hertfordshire, AL2 2DD
Phone number: +44 (0)870 458 4242
Fax number: +44 (0)870 458 4273
www.tintechnology.com
-----------------------------------------------------------------------------------------------------------------
This information given in this e-mail is for guidance only. It should be reproduced only in full, with no part taken out of context without prior permission. We believe the information provided in this statement and any attachments is reliable and useful, but it is furnished without warranty of any kind from the authors.
Potential users should make their own determination of the suitability of any information provided and adopt any safety, health, and other precautions as may be deemed necessary by the user.
No licence under any patent or other propriety rights is granted or to be inferred from the provision of the information herein. In no event will Tin Technology or any of its affiliates be liable for any damages whatsoever resulting from the use of or reliance upon this information.
The information contained in this e-mail is intended only for the individual or entity to whom it is addressed. It may contain privileged and confidential information and if you are not an intended recipient you must not copy, distribute or take any action in reliance on it.
If you have received this e-mail in error, please notify us immediately by telephone on +44 (0)870 458 4242. Please also destroy and delete the message from your computer.
-------------------------------------------------------------------------------Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-------------------------------------------------------------------------------
|
