Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 28 Jan 2004 09:27:22 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
So you can imagine what this does to solderability on outer layers,
bearing in mind that most subsequent copper plating is epitaxial.
Brian
Rudy Sedlak wrote:
> Catherine Smith:
>
> One of our customers began experiencing this, and we did some pretty thorough
> research, and found it was exactly what Phil thought it was...holes in the
> Copper foil, allowing epoxy resin to seep through.
>
> The customer set up incoming inspection on laminate using a black
> light...FR-4 glows when hit by black light...and has gotten their vendor to be more
> careful of the Copper they use.
>
> We are seeing a lot of Copper foil being imported that is not up to the usual
> standards, and it seems to cause this problem more often.
>
> Good luck...
>
> Rudy Sedlak
> RD Chemical Company
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> -----------------------------------------------------
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|