TECHNET Archives

January 2004

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 26 Jan 2004 13:04:04 EST
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines)
In a message dated 1/26/2004 1:01:09 PM US Eastern Standard Time,
[log in to unmask] writes:
I know that 0402 is a mature technology. I am getting ready to do a board
which will use all 0402 passives. I have very little experience with 0402.
From what I have been reading it seems very important that components go
through the oven broadside so that both sides go liquidous at the same time.
There is an alternative.  Multicore offers a solder paste that is
"Anti-tombstoning" and has been written up in a couple of articles for the magazines.
The staged reflow of the two alloys in the powder would greatly reduce the
problems you describe.

Jon Moore

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2