Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 28 Jan 2004 05:57:20 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Annealing the plating can reduce the internal stress in the
plating and diminish whisker growth.
Wrong?
The annealing process could be the answer to the whisker problem.
Normally molecules of materials are in clumps and their north south pole
orientations of each clump are pointing in every direction. Their
molecule clump structure is very fragile which allows them to grow.. When a
material is annealed the molecules poles of the whole, point in the
same direction. The molecules of the material are attached to each other
form every side, thus a strong material.. The attachment will prevent them
from creating growths or whiskers. I am not a material expert, but have
annealed materials for a long time and know a little about the theory
behind it.. Perhaps some of the materials experts can correct my simple way
of explaining annealing and/or add from their expertise..
Regards,
Ramon
> -----Original Message-----
> From: Guenter Grossmann [SMTP:[log in to unmask]]
> Sent: Monday, January 26, 2004 11:39 AM
> To: [log in to unmask]
> Subject: Re: [TN] Antw: [TN] Lead-free Component Finishes
>
> Jim
>
> I was talking last week with a person from Motorola Germany and a
> someone from Collini. In the discussion both told me that by using a Ni-
> underplate and with the appropriate plating chemistry they don't' see
> problems with whiskers anymore. Earlier, in a conference from
> Electrosuisse, I had a discussion with a speaker talking about whisker
> growth as a function of grain size of the Sn plating which can be
> controlled with the appropriate chemistry and process parameters. What I
> learned in these discussion was that whiskers are a problem that can be
> controlled. In the worst case, in my understanding, it's a question of
> money. Annealing the plating can reduce the internal stress in the
> plating and diminish whisker growth.
> Wrong?
>
> Best regards
>
> Guenter
>
>
>
> EMPA
> Swiss Federal Laboratories for Materials Testing and Research
> Centre for Reliability
> Guenter Grossmann, Senior Engineer
>
> 8600 Duebendorf
> Switzerland
>
> Phone: xx41 1 823 4279
> Fax : xx41 1 823 4054
> mail: [log in to unmask]
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|