Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 2 Dec 2003 07:38:55 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Lorraine,
We use Mydata as a prototype/backup equipment just for that reason...
It is one of the best sollutions if You are up to High-Mix-Low-Volume and
fast Prototyping...
Furthermore, If You invest in Agilis feeders, than Your setup-time is
reduced down to 15 sec per component.
Mydata (MY12 and MY15) are a good compromise when considering investment
costs vs. production costs.
Regards,
Sasha
*************************************************************************
Sasha Miladinovic - Production Engineering
Amersham Biosciences, PCB Production, Umeå
Tel: +46 (0) 90 150 232
Fax: +46 (0) 90 138 372
E-mail: [log in to unmask]
*************************************************************************
"Reid, Lorraine" <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
2003-12-01 17:37
Please respond to "TechNet E-Mail Forum."; Please respond to "Reid,
Lorraine"
To: [log in to unmask]
cc:
Subject: [TN] Low Volume High Mix
I've been asked to look at options for Surface Mount Placement equipment
which is geared towards low-volume, high-mix. In common with a lot of
companies, we are seeing a shift in our market towards high tech, low
volume work and we need to assess how best to meet that requirement.
The ability to use strips of components, and/or loose components as well
as the more traditional reels is essential. Most of the SMT equipment
in the market is targeted towards high volume, so I would welcome any
suggestions.
Thanks in advance,
Lorraine
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|