Our company has adapted the IPC-A-610C standard. We often use self tapping screws like taptites when mounting PCB's in boxes.
In the above mentioned standard this type of screws are not mentioned - only screws with "regular" thread. When using these one or two washers are mandaory depending on the material.
My question is, does the IPC standard include self tapping screws?
Is it necessary to use washers in connection with self tapping screws?
The automobile industry uses a variety of self tapping screws and in most instances no washer is used - and this seems to work fine.
Regards
Torben Taustrup
----------------------------------------------------------------------------
Torben Taustrup - [log in to unmask]
PTA, Technical Assistant / Radio Mechanic
Vestas Wind Systems A/S
Paludan-Müllers Vej 82, 8200 Århus N
Tlf: +45 97 30 40 31 Telefax: +45 97 30 40 01
----------------------------------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------