Hi.
I am desinging a multi-chip module. In my desing, two off-the-shelf IC's
in TQFP packages are mounted on an FR-4 PCB. This board has a Land Grid
Array footptint on the bottom and will be soldered to the motheboard
using a standard reflow process with Sn63Pb37 alloy. What alloy and
temperature profile would you recommend for assembling the multi-chip
module itself? The chips on the module were not designed to withstand
more than 230 deg C and are normally soldered using the same Sn63Pb37
alloy...
Thank you for your help...
Regards,
Sergey Ermolin
Dust, inc
2560 9th Street, #218
Berkeley, CA 94710
510/225-2137
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------