Yannick,
        Your current stencil vendor, along with your adhesive supplier,
should be able to provide guidelines for successful stencil design and
printing parameters. If you would like some reference material, search
the web for 'adhesive stencil printing'. Here's a couple to get you
started:

http://www.speedlinetechnologies.com/DOCS/Publications/Adhesives%20Tutor
ial.pdf

http://www.smtinfo.net/docs/APEX%20paper%202002%20Metal%20Stencils%20for
%20Glue%20Printing.pdf

Mike McMonagle


-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Yannick Brisson
Sent: Friday, October 03, 2003 8:41 AM
To: [log in to unmask]
Subject: [TN] Adhesive printing


Hi,

        Does anybody ever try to print adhesive on a board, we have a
double side board which need to go after SMT in the wave, we must put
some glue on the board to keep the component on the board.  And it's
time consuming to get the glue off the board.  Now we are thinking to
print adhesive with a stencil.  What do I need to do that? what type of
stencil, squeegees, aperture for the component, how much adhesive must I
have on the board, thickness of the stencil, in other wordswhat do I
need to know to do this opertaion.

Thanks you

Yannick

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------