TECHNET Archives

September 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
David Ricketts <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 26 Sep 2003 10:10:34 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (36 lines)
Exactly what is their concerns? I feel you've given your board house
everything you can, since that is what I do as well. More often than
not, it is the inexperience of the CAM operator, not your info. Don't
fall for the trap of renaming your nets to one name for the IPC-356
netlist, since the whole point of error checking is lost.

David Ricketts
PCB Design Services

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Miswald, Ron
Sent: Thursday, September 25, 2003 2:16 PM
To: [log in to unmask]
Subject: [TN] IPC-356 netlist question


Our board house is raising a flag about our IPC-356 netlists.  Their
concern is that we short various grounds due to short comings in out
layout software.  As an example we have digital ground, 1.8V crystal
ground, and 3.3V crystal ground segregated until they tie together
(short) at the power supply.

My question,  are there easy work arounds for the board house?  I do
include a readme listing the ties, the nets they short, and their (x,y)
locations.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2