TECHNET Archives

September 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Peter L." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 11 Sep 2003 13:50:53 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (123 lines)
Hi Technet,

I didn't receive many responses when I asked if anyone has come across
seeing the moisture-within-the-glue defect underneath SMT components.

In order to remove the mositure off the assembled units, I am experimenting
with various low temp. baking cycles. I like to ask if anyone have
experience removing moisture that was trapped within the glue underneath
SMT components (0805s)?

Due to other thermal sensitive T/H components on the boards I am limited to
100C baking or less.

Rgds,
Peter



Date:         Thu, 28 Aug 2003 13:29:00 -0400
Reply-To:     [log in to unmask]
Sender:       TechNet <[log in to unmask]>
From:         joyce <[log in to unmask]>
Organization: EXFO-TO
Subject:      Re: Moisture under chip capacitors
X-To:         "TechNet E-Mail Forum." <[log in to unmask]>,
              "Peter L." <[log in to unmask]>
In-Reply-To:  <[log in to unmask]>
Content-Type: text/plain; charset="iso-8859-1"

It is epoxy based material.  If you see voids, it got be there before
curing....
                                                jk

>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Peter L.
>Sent: Thursday, August 28, 2003 12:26 PM
>To: [log in to unmask]
>Subject: Re: [TN] Moisture under chip capacitors
>
>
>The adhesive was printed and cured at no more than 2deg/s and
>150degC for 100secs.
>
>The particular adhesive used was Epibond 7275. We suspected
>that it was a material related issue - either the glue was
>mishandled and left too long on the line, or old/ expired
>batch of glue was used.
>
>Any suggestion on method to drive the moisture away under the
>components? Baking conditions?
>
>
>Rgds,
>Peter
>
>
>
>
>>Date:         Mon, 25 Aug 2003 07:47:30 -0400
>>Reply-To:     [log in to unmask]
>>Sender:       TechNet <[log in to unmask]>
>>From:         joyce <[log in to unmask]>
>>Organization: EXFO-TO
>>Subject:      Re: Moisture under chip capacitors
>>X-To:         "TechNet E-Mail Forum." <[log in to unmask]>,
>              Peter Lee <[log in to unmask]>
>>In-Reply-To:  <000001c36abe$e03472d0$7e63ad8e@homeg8br34o791>
>>Content-Type: text/plain; charset="iso-8859-1"
>
>>What is the adhesive and how was it cured?
>                                            jk
>
>>-----Original Message-----
>>From: TechNet [mailto:[log in to unmask]] On Behalf Of Peter Lee
>>Sent: Monday, August 25, 2003 12:11 AM
>>To: [log in to unmask]
>>Subject: [TN] Moisture under chip capacitors
>>
>>
>>Technet,
>>
>>I have come across a rash of failed assemblies that have 0805
>>capacitors and resistors, bottom side glued, wave soldered
>and washed.
>>Trouble shooter reported touching up the solder joints on a few areas
>>and the boards would pass test.
>>
>>I had a look at one board which was reported to have a 0805 56K
>>resistor with "drifting" values. I pulled the component off
>>mechanically in order not to apply any heat and noticed several
>>mini-voids within the adhesive body. I have seen solder bridge within
>>the glue before but this was the first time I saw wet residue within
>>the voids.
>>
>>You can view a sample image from Steve's web site:
>>http://www.stevezeva.homestead.com/files/SMTAdhesive.jpg
>>
>>The
>>image showed the bottom side of the cracked resistor after removal
>>(white), with a portion of solder mask (green) and SMT adhesive (red).
>>
>>I used a 8mil stencil. The thermal profile was verified and conformed
>>to the slope/ curing specs.
>>
>>Has anyone seen this before? Any explanation as to how the void was
>>formed and how moisture got tapped in? Does anyone re-use
>their glue on
>>the line or throw away any left-over to avoid moisture in the glue?
>>
>>
>>
>>Rgds,

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2