TECHNET Archives

September 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Neil Maloney <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 4 Sep 2003 15:19:47 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (64 lines)
THe SMR 400 is a 4 zone oven. We use a Vitronics s-400 (also 4 zones) but are using it with 'conventional' (meaning lead) solder. With only 4 zones, you will have to be pretty tight with your reflow profile, as there is not a lot of preheat\reflow time to work with. In a high mix environment you may to do a lot of conveyor speed changes. Ours has worked near flawlessly over the past 7 years, but our product has traditionally been close to three or four small sizes.   

With the higher reflow temps needed for lead-free, a 4 zone oven might not have have enough 'room' to give you a better production. IMO, to lessen your future headaches, you may want to consider a longer oven for lead free.  I am.


Best regards,

Neil Maloney,  Manufacturing Engineer\ LAN Administrator
Contemporary Control Systems, Inc
2431 Curtiss St
Downers Grove, IL 60515
 ph:630-963-7070
fax:630-963-0109
e-mail: [log in to unmask]
website: http://www.ccontrols.com




-----Original Message-----
From: Poh Kong Hui [mailto:[log in to unmask]]
Sent: Thursday, September 04, 2003 4:24 AM
To: [log in to unmask]
Subject: Re: [TN] Reflow Oven SMR 400


Hi Technetters,

I am in the process of buying a used machine, Vitronics, SMR 400, which the
owner of this equipment hardly used it.

However, I know nothing about this machine performance.

I know this is a rather old machine, I beleive there are quite number of
people still using it, and if some one would like to advise me on the
performance of this machine.

By the way, can this piece used for lead-free reflow process ?

Thanks.

Regards,
Poh

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2