Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 24 Sep 2003 16:10:29 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
It just so happens that we build a multi-chip module using a 625-BGA
package. We buy the empty package from Kyocera, install multiple die and
discretes, seal the lid, attach the balls (4 hi-temp in the corners) and
solder the BGA to our PWB.
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Steve Gregory [SMTP:[log in to unmask]]
Sent: Wednesday, September 24, 2003 3:25 PM
To: [log in to unmask]
Subject: Re: [TN] 5Sn / 95Pb Solder Sphere
Jim,
Do you get the devices like that, or do you put the hi-temp balls in
the corners yourself?
Thanks!
-Steve Gregory-
Victor, we use high temp solder balls on the 4 corners of a
625 ceramic BGA.
The main purpose is to prevent the device from collapsing,
causing solder
bridging. Maintaining the stand-off height after reflow
also increases long
term reliability.
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV
1.8e
To unsubscribe, send a message to [log in to unmask] with following
text in the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information,
or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|