Sender: |
|
X-To: |
|
Date: |
Mon, 8 Sep 2003 10:56:08 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
We use "Pallets". These are ESD foam backed with a rigid ESD material.
The pallets come in all sizes and shapes. Some have sides, some are stackable.
The plus side to these is the visibility. It's easy to see what's on them.
The downside -- They do get worn and dirty over time and there is a risk of
cross contamination with flux if not careful. I suppose that's a risk with
anything that will be transported to a cleaning process.
Totes can also be used where the boards can be slid in and out. I've seen components
get ripped off the board if not spaced properly though. The plus side to these is that
they have a cover to protect from dust, and, product may be shipped in them or stored.
Tray's are also an option. The trays can be placed into rolling carts and moved around. Again, the risk of contamination needs to be brought up. The trays need to be washed periodically and should have a protective mat on them to prevent damage to "bottom side" components. Trays are best for larger lots where the pallets mentioned above work well for us as we build in very small lots (4-20 boards/lot)
-Carrie
-----Original Message-----
From: Jason Wilson [mailto:[log in to unmask]]
Sent: Monday, September 08, 2003 8:46 AM
To: [log in to unmask]
Subject: [TN] Circuit Card Handling??
Hello Techneters,
I am looking for a new method to transport partially built assemblies in
WIP.
I would appreciate hearing how other people handle their products. If there
are any vendors out there, please contact me off-line.
I have already searched the archives, and there is not a lot of posts for
handling boards.
Thanks in advance,
Jason
Production Engineer
Northrop Grumman Canada Corporation
Halifax
Box 960
Enfield Postal Station
249 Aerotech Drive
Enfield, Nova Scotia
B2T 1K9
TEl: (902) 873-2000 Extension 6564
FAX: (902) 873-2174
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|