TECHNET Archives

July 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
John Parsons <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 8 Jul 2003 13:37:12 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines)
Greetings all,

I could use a little help here.  I don't have an impedance solver at hand
and I have a customer looking for a suggested build for a 10 and 12 layer
board with signal traces running at 100ohm (single ended and differential).
They will have signal traces at 4-6mil's (I am using 5mil for my rough
calculations) but I can't see how to do this with regular FR-4 laminate (Er
4.2).  Has anyone build/designed boards with this requirement?  Can you give
me some clues as to lay-up or laminate spec's that could save me some leg
work?

Stack is as follows; 1/2oz base copper all layers
10 layer, Sig,Plane,Sig,Plane,Sig,Sig,Plane,Sig,Plane,Sig
12 layer, Sig,Plane,Sig,Sig,Plane,Sig,Sig,Plane,Sig,Sig,Plane,Sig

Regards
John Parsons

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2