According IPC-610C Parg. 5.2.7 its per class 1, 2 and 3.
Minimum vrtical length is 3.3mm (not include the bending radius and
shoulders). If the component is heat dissipating, you may need space
between the PCB to the component body of minimum 1.5mm (total 4.8mm lead
length)
Best Regards
ROKAH Reuven
Chief Engineer
ECI Telecom LTD.
Operations Division
30 Hasivim St. Petah-Tikva 49517
ISRAEL
Tel: 972-3-9266734 Mobile:972-55-786734
Fax: 972-3-9266480
e mail: [log in to unmask]
Stefano Riccardi
<stefano.riccardi To: [log in to unmask]
@DIADIX.IT> cc:
Sent by: TechNet Subject: [TN] pin lenght
<TechNet@LISTSERV
.IPC.ORG>
09/07/03 03:04 PM
Please respond to
"TechNet E-Mail
Forum."; Please
respond to
Stefano Riccardi
Hi
a basic question:
with a 2.5mm tick PCB, what is the minimun lenght of a THT component pin?
Thanks
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
