Steve, what I did in a previous life was to create an engineering log book
for prototypes that was called out in our ISO procedures.    We used this
book to allow us to make very generic travelers and as we found problems
and or issues during the prototype run we would write them down in this
book to help us remember the issues later.   You know how a mind seems to
forget things a day or two later.    This helped in the ISO issues and
helped us remember.



                      Steve Gregory
                      <[log in to unmask]        To:       [log in to unmask]
                      M>                       cc:
                      Sent by: TechNet         Subject:  [TN] ISO and prototypes....
                      <TechNet@listserv
                      .ipc.org>


                      06/03/03 09:08 PM
                      Please respond to
                      "TechNet E-Mail
                      Forum."; Please
                      respond to
                      SteveZeva






just curious...how do you deal with  ISO and prototypes? Do you do
full-blown work instructions? Try to run things through normal production
processes, so that you have traceability? Or do you you treat it as it is,
a prototype?

Going through some stuff here...thinking that we put more stuff into
prototypes than we need to...just curious what everybody else does...I have
my past experience, but that's not good enough.

Like to hear from everybody else...

-Steve Gregory-
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------