Peter and Steve,
My Prototypes got different definition:
(1) functional prototype, anything goes with full function but no
reliability (normally constrained by time to demo, budget and limited
component source).
(2) MFG demo capability prototype (with all the real BOM and will use
for reliability initial assessment).
For NO. 1, anything goes (paper clip, foam cups, tape, etc)
For No.2. As close to real product as possible with all the deviation
from the "real" product lay out in document.
Best regards,
jk
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of
>[log in to unmask]
>Sent: Tuesday, June 03, 2003 9:34 PM
>To: [log in to unmask]
>Subject: Re: [TN] ISO and prototypes....
>
>
>Hi, Steve,
>
>Personally, I try to put Prototypes through full production
>processes just so that there are as few surprise lessons to
>learn as possible. All the R&D work should have been done by
>then and our "Prototype" models are the ones that have to go
>through all the qualification testing. No sense in making them
>one way and production boards a different way or your qual
>testing means nothing.
>
>Peter
>
>
>
>Steve Gregory <[log in to unmask]> 04/06/2003 09:08 AM
>Sent by: TechNet <[log in to unmask]>
>
>Please respond to "TechNet E-Mail Forum."; Please respond to SteveZeva
>
> To: [log in to unmask]
> cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group)
> Subject: [TN] ISO and prototypes....
>
>
>
>
>
>
>
>
>just curious...how do you deal with ISO and prototypes? Do
>you do full-blown work instructions? Try to run things through
>normal production processes, so that you have traceability? Or
>do you you treat it as it is, a prototype?
>
>Going through some stuff here...thinking that we put more
>stuff into prototypes than we need to...just curious what
>everybody else does...I have my past experience, but that's
>not good enough.
>
>Like to hear from everybody else...
>
>-Steve Gregory-
>---------------------------------------------------
>Technet Mail List provided as a free service by IPC using
>LISTSERV 1.8e To unsubscribe, send a message to
>[log in to unmask] with following text in the BODY (NOT the
>subject field): SIGNOFF Technet To temporarily halt or
>(re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
>http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/html/forum.htm for additional information, or contact
Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
[This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please delete it and notify us immediately; you
should not copy or use it for any purpose, nor disclose its contents to
any other person. Thank you.]
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
