Robert,
Extra UV may or may not be a good thing.  Extra UV could cause damage to
the coating (particularly, your acrylic components in the coating).
Just like your pastic chair sitting on the deck, it would yellow and
become brittle.  In addition, you may change the surface characteristic
as well, for example, if you got extra oxygen at surface, you may
preferentially attract the polymeric material and push the metal or
in-organic filler away from the interface... Not something you want oto
find it out later....Be careful what you wish for....

My 2 cents.

jk


>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of
>robert Tarzwell
>Sent: Friday, June 27, 2003 2:17 PM
>To: [log in to unmask]
>Subject: Re: [TN] Hysol SR1000, SR1001 - why?
>
>
>No I would not use sr1000 if I possible could  as a pcb
>manufacturer. possibly i would use it as a filler for filed
>vias but there are new oven cured masks I like better. however
>the new Photo imagble solder mask is very good, much harder
>then sr1000 and features higher dialectric.
>
>If you specify a extra UV curing cycle ( check with
>manufacturer first)but a uv cure realy creates a hard durable
>mask. with fine edge detail and no surface contamination.
>
>---------------------------------------------------
>Technet Mail List provided as a free service by IPC using
>LISTSERV 1.8e To unsubscribe, send a message to
>[log in to unmask] with following text in the BODY (NOT the
>subject field): SIGNOFF Technet To temporarily halt or
>(re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE
>mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest Search the archives of
>previous posts at: http://listserv.ipc.org/archives Please
>visit IPC web site http://www.ipc.org/html/forum.htm for
>additional information, or contact Keach Sasamori at
>[log in to unmask] or 847-509-9700 ext.5315
>-----------------------------------------------------
>

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------