DESIGNERCOUNCIL Archives

June 2003

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Brand, Rodney" <[log in to unmask]>
Reply To:
(Designers Council Forum)
Date:
Thu, 26 Jun 2003 11:12:17 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (17 lines)
Mark,
Table 9-3(IPC-2221) is the tolerance for the drilled holes to the datum,
this is a circular tolerance. This is not the fabrication tolerance
which is several tolerances added together see table 9-1(IPC-2222 or
IPC-2221).
Rodney

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2