Dear Peter Duncan,
Over-reacting is a form coming out from a human being due to losing calm.
I am not hurt as you have calmed down and taken things in the right
perspective.
It was a simple question on seeking additional info on a supplier's product
for a particular process about which self did not get the desired info
after
sufficient wait and hence a reminder to those from whom some more data
could be available.
Thanks for your amends and positive apparoach.
Regards,
M A Ranganath
GM - Technical & Quality
Sanmar Micropack Limited
Plot No.16, Jigani Industrial Area,
Bangalore - 562 106. INDIA
Phone: 91 - 80 - 7825223/224/226/389
Fax : 91 - 80 - 7825225
Email : [log in to unmask]
[log in to unmask]
COM.SG To: [log in to unmask]
Sent by: TechNet cc:
<TechNet@listser Subject: Re: [TN] core fill-NTC
v.ipc.org>
02-06-03 06:12
AM
Please respond
to "TechNet
E-Mail Forum.";
Please respond
to peter.duncan
Uh, Oh! Sounds like I may have put not one but both feet in it, up to my
knees! If I have, and the post was an innocent one, then without hesitation
I offer my sincerest apologies to Mr Raganath and will make whatever amends
I can.
I re-read the post I jumped on, but regret that I still cannot figure out
what the request is about if not asking for a mailing list. Mr Raganath, I
hope you can forgive my reaction and let us have more information about
what you need.
Peter
"Barr, Bob" <[log in to unmask]> 30/05/2003 08:03 PM
Sent by: TechNet <[log in to unmask]>
Please respond to "TechNet E-Mail Forum."; Please respond to "Barr, Bob"
To: [log in to unmask]
cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group)
Subject: Re: [TN] core fill-NTC
You are correct Geoff. A quick check of the archives indeed shows Mr.
Ranganath as a contributor of helpful information to this forum. I don't
understand what is going on with this forum lately with people being jumped
on for no apparent reason. It really is time to chill and just get back to
work.
Bob
> -----Original Message-----
> From: Geoff Layhe [mailto:[log in to unmask]]
> Sent: Friday, May 30, 2003 7:35 AM
> To: [log in to unmask]
> Subject: Re: [TN] core fill
>
>
> I took the original mail to be from a fabricator looking for
> info on core
> fill (Howe Fill?).
> I think Mr Ranganath has asked questions before and supplied
> some answers.
> If I,m wrong my apologies, put it down to another case of
> foot 'n mouth
> disease.
> Geoff Layhe
>
> -----Original Message-----
> From: [log in to unmask] [mailto:[log in to unmask]]
> Sent: Friday, May 30, 2003 11:58 AM
> To: [log in to unmask]
> Subject: Re: [TN] core fill
>
>
> STEVE!! Please don't explode again! Let Jack or Stacy handle this.
>
> Jack or Stacy, can you sent a few million volts back down the
> line and fry
> Sanmar Group for their blatant intrusion on our discussion
> forum to tout
> for business in this unforgivable manner? We've never heard
> of these guys,
> and they've obviously joined the list with the express
> purpose of trying to
> capture customers.
>
> Mr Raganath, I hope you get the message that this type of mail is not
> permitted or appreciated on this forum, and far from
> attracting business,
> you will have succeeded in repelling any from this community
> no matter how
> good your services are.
>
> Peter Duncan
> ST Aero
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
The information contained in this message is legally privileged and
confidential information intended only for the use of the addressed
individual or entity indicated in this message (or responsible for
delivery of the message to such person). It must not be read, copied,
disclosed, distributed or used by any person other than the addressee.
Unauthorised use, disclosure or copying is strictly prohibited and may be
unlawful.
Opinions, conclusions and other information on this message that do not
relate to the official business of any of the constituent companies of
the SANMAR GROUP shall be understood as neither given nor endorsed by
the Group.
If you have received this message in error, you should destroy this
message and kindly notify the sender by e-mail.
Thank you.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
