Good morning,
My Name is Barry and I have been asked to locate some information. As I have
had great
experiences with TechNet, I thought I would Give the Designer Council a Try.
So here goes.

I ask for some input on the following Message that I received this morning.

We have an issue on a customer drawing, where the customer calls out
dimensioning on their data, to 3 decimal places, but do not provide a
tolerance table or tolerance indication at all. The exact method the
customer used to call-out dimensions on their drawing is: 250Mils or 530Mils
for example. The pcb shop that built these is saying that, in the absence of
having a tolerance call-out, they default to IPC standard tolerance. The
customer service person at the pcb shop, cannot tell me which standard he is
referring to, nor can he tell me what that default IPC standard tolerance
might be. We do not have the 2221 IPC design standard nor do I know if it
would cover this issue. We have issue with the dimensions of these pcbs we
received, including hole positions.

Can you find out what the IPC default tolerance is for dimensioning of pcbs,
in the absence of having a specific tolerance call-out?

Barry Gallegos
Western Electronics

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------