DESIGNERCOUNCIL Archives

June 2003

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Type:
text/plain; charset="iso-8859-1"
Sender:
DesignerCouncil <[log in to unmask]>
Subject:
Annular Ring Question
From:
Mark Holmes <[log in to unmask]>
Date:
Fri, 27 Jun 2003 10:41:38 +0100
MIME-Version:
1.0
X-To:
"IPC Designer council (E-mail)" <[log in to unmask]>
Reply-To:
"(Designers Council Forum)" <[log in to unmask]>, Mark Holmes <[log in to unmask]>
Parts/Attachments:
text/plain (29 lines) 
Hi All,

IPC-2221 9.2.2 Annular Ring Requirements states:

"The minimum annular ring on EXTERNAL layers is the minimum amount of copper
(at the narrowest point) between the edge of the hole and edge of the land
AFTER PLATING of the hole"

"The minimum annular ring on INTERNAL layers is the minimum amount of copper
(at the narrowest point) between the edge of the drilled hole AFTER DRILLING
the hole"

I am confused as to why there are two definitions. Can anyone help?
I have a few Ideas of my own, but would appreciate an explanation.

Best Regards,

Mark

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2